Daily Maintenance Of The Spray Gun 2

As an Oil Filter Wrench Factory, we continue to share with you the daily maintenance of the Air Spray Gun.

2. Maintenance of Air Spray Gun

It is best to lubricate the Air Spray Gun after each day of work and lubricate the parts with a light machine. Seals, springs, needles and nozzles must be replaced periodically due to normal wear and aging. Replacement should be carried out according to the manufacturer's instructions. Excessive oil can flow into the paint and oil passages, causing spray defects, so care must be taken when lubricating, and the oil and paint mix will reduce the quality of the spray. Do not soak the entire Air Spray Gun in the cleaning solution for a long time, which will harden the seal and destroy the lubrication.

For the best repair results, use different Air Spray Guns for different coatings and conditions. It is recommended that each person be equipped with four spray guns, one for primer and medium coating, one for top coat, varnish layer, one for silver paint spray, and one small repair spray gun for point repair. use. If these Air Spray Guns maintain good cleaning and work order, they will save a lot of adjustment and cleaning time when changing guns.