Malfunction Treatment of Grease Gun

As Grease Gun Supplier, today we will introduce some methods of malfunction treatment of Grease Gun.

1, if there is a hard pull rod, you can pull the pole several times, so that the air inside can be mixed with grease, reducing the volume of a single bubble may be solved, but the effect is not very good every time.

2. The most effective way is to vent the air, but it needs the support of the hardware. The general gun has the design of the exhaust port. When you slowly open the exhaust screw, the air will come out.

3, the last technique is obtained from a friend. He says this method is very good. When you feel there is a gas in it and you can't get out, just turn the oil gun body and the pump body a few or back and forth (the best is the side pressure) to keep you successful. The reason is not difficult, that is, when you turn, the air bubbles are actually rotating.