The steps of changing oil(2)

When you have an oil filter wrench, you also need do as followings:

6. After the oil has drained (give it 10-30 minutes for a good drain if you have the time), wipe away oil residue from the oil pan and put the drain plug back in. Tighten it firmly, but don’t overdo it. Your owner’s manual will have the exact torque required.

Do me (and other animals) a favor, clean up oil leaks and don’t dispose of oil in your yard, streams, or waste-water drains. Your favorite Advance store will safely dispose of your used oil for free! Available at most of our 3,500 stores (unless prohibited by law).

7. Reposition your drain pan by the oil filter and remove it using your oil filter wrench (or hand if it will budge). Some wrenches work from the end, while others wrap around the filter.

8. If your filter still won’t budge, puncture it with a screwdriver at its lowest point to drain, then use the same screwdriver to spin off the filter. A little more oil will come out when you spin off the filter, so have your rags handy.

9. Apply a film of clean oil to the top of the new filter gasket. Then spin the filter on using only your hand. Go ¾ of a turn after you feel the gasket make contact with the engine after spinning it on.

oil change tips10. Double check the filter and drain plug for tightness, then fill your engine with the recommended viscosity and amount of motor oil. (Again, your owner’s manual will provide this).

11. Determine your oil level using the dipstick, then check for any leaks. Start the engine and check for leaks again. Bring used motor oils to Advance for proper disposal or recycling.

Well, that’s a wrap. You can now safely do your own oil change or you learned some tips. Who said you can’t teach an old dog new tricks?!